Ethernet/Token Ring Ip Interface Parameters - Cabletron Systems FRM User Manual

Configuring IP
Table 13-4 Ethernet/Token Ring IP Interface Parameters
Parameter
Maximum Tr ansmission Unit
Routing Metric Count
ICMP Redirects
RIP Support
(sec)
RIP Flash Updates
(sec)
RIP Full Updates
Priority
Bandwidth Allocation Group
Interface Type
Source IP Address
Networ k Mask
Broadcast Address
LAN Card Number
Proxy ARP Enabled
Secondary Address Parameters
Seq
Sec. IP Addr
NetMask
Bcast Addr
RMetric
RIP Support
The default value of the network mask will be configured automatically, to reflect the
1
appropriate address class, after an IP address is specified. (
by
Source IP Address
configured as unnumbered (and, therefore, no
default value of
Network Mask
assigned.
If an IP address (
changed, the network mask will automatically change to
default values appropriate for the new address. For this
reason, configure the IP address first, then the mask.
The default value of the broadcast address will be configured automatically after an IP
2
address or a network mask is specified. The value will be the dotted decimal notation
result of "ANDing" the binary versions of the IP address and the network mask, then
filling in the remaining bits with
and
Address Network Mask
.)
NetMask
If the Source IP Address/Sec. IP Addr) or Network
Mask/Netmask is specified/changed, the associated
broadcast address will automatically change to default
values appropriate for the new address. For this reason,
configure the IP address first, then the mask, then the
broadcast address.
Valid Values
1–4096
0–255
Y/N
(Enabled),
0 1
(Disabled)
2
5–300
10–300
0–9
1–16
Ethernet, 802.3, 802.5
1.0.0.0–223.255.255.255
1.0.0.0–223.255.255.255
1.0.0.0–223.255.255.255
0
Y/N
1–15
1.0.0.0–223.255.255.255
1.0.0.0–223.255.255.255
1.0.0.0–223.255.255.255
0–255
Enabled, Rcv Only, Disabled
, and is determined by
NetMask
Source IP Address
will be taken from the numbered interface that is
Source IP Address/Sec. IP Addr
s. (
1 Broadcast Address
, while is associated with
Bcast Addr
Default Value
1500
0
Y
(Rcv only),
(Enabled)
0
10
30
5
1
n/a
none
see note
see note
0
N
next in sequence
none
see note
see note
0
Enabled
is determined
Network Mask
.) If the interface is
Sec. IP Addr
is configured), the
) is specified/
is associated with
Source IP
Sec. IP Addr
1
2
1
2
and
13-9