Table of Contents
Advertisement
SAP Table
Status Displays
To display the contents of the SAP Table, press
Menu (or
[C], [F], [B]
from the Main Menu). Each entry will contain the following:
– includes the name assigned to the server, the node identifier, and the
Name
address socket.
Router Addr
– is the address of the router that will forward a packet when this
route is used.
– is a SAP Service Type code, displayed in hex format. Some common
Type
codes are:
(print queue),
0003
– (Intervening Networks) is the number of routers that a packet must pass
IntNw
through to reach the server if this route is used.
– (Do Not Age) identifies whether aging is enabled. (Aging allows deletion
DNA
of entries from the table after a specified period.) Routes configured as static
(see
"Configuring Static IPX
). Interfaces with
TRUE
will also be
Timer
– (Interface) is the IP interface.
Intf
(file server), and
0004
Routes" on page 14-16) will not age (
specified in their IPX Interface records for the
0
. All others will be
TRUE
at the Protocol Status Displays
[B]
(print server).
0007
.
FALSE
DNA
=
SAP Age
19-27
Advertisement
Table of Contents
