Table of Contents
Advertisement
Moving Through the Menus
Prompts
On-Line Help
2-6
To select a menu item, press the letter to the left of the item.
To return to the next higher menu from a lower-level, press
To move from operations under one Main Menu entry to operations under another
entry, you must return to the Main Menu. The easiest way is to press
until the Main Menu is displayed.
Within the menu operations, there are two kinds of prompts:
Information prompts – respond by typing the requested information, then
pressing
.
[Enter]
Yes/no prompts – respond by pressing
Throughout this manual are tables of valid and default values. To specify a default (if
one exists), press
[Enter]
Pressing
[Enter]
prompt to automatically select the default choice.
Most screen menus display a prompt called
prompt will usually display a list of options. To make a selection, press either the
function key shown preceding the desired option or the character preceding the
desired menu item. The list of options varies, depending on what menu is displayed;
most of the options are described below.
minal keypad are listed on page 2-8.)
F1: Select Another Record
—displays the first prompt that appeared on your screen after you
Next Record
made your menu selection, so you can specify another record.
—refreshes a display with updated information.
Redisplay/Refresh
F2: Next Record
or
Remote Refresh
—displays the next sequential record on your screen for verification,
Next Record
modification, or deletion.
—refreshes a remote display.
Remote Refresh
—returns you to the previous menu, saving any changes you have made.
F3: Exit menu
Some menus have two sets of values:
Changes will affect only the database, unless you press
pressing
System memory values are described on
and
page 6-3
[Y]
in response to a prompt.
when it is not required may cause the next
Option:
(Function key equivalents
or
:
Redisplay/Refresh
:
. (This will update the system memory.) Database and
[F3]
for Ports.
[F3]
.
[F3]
or
.
[N]
. Pressing
in response to this
[?]
on an async ter-
Database
and
System Memory
page 4-3
for Node Defaults
9W004 4.0 User Guide, Rev 01
repeatedly
.
before
[F7]
Advertisement
Table of Contents
