Table of Contents
Advertisement
Stopping Operation
Logging Out
Rebooting
Shutting Down
What Next?
2-10
If you have been working within menu operations and wish to log out, press
Main Menu. The Port Status Display screen will be displayed, with any updates. The
software will continue to run, but only those who know the password will be able to
gain access to the menus. You must press
the Main Menu.
To reboot from within the menu level, press
You cannot reboot the device from the initial Port Status Display. You must
first press
[F1]
Rebooting the device clears all connections. If you do not want to
do this, simply press
Locally, an FRM can be rebooted via the recessed Reset button located near the top of
the module.
An FRM cannot be shut down without powering down the SmartSwitch 9000;
however, the FRM can be unplugged and removed without disrupting operation of the
SmartSwitch 9000 or the other modules in the SmartSwitch 9000.
Once you are familiar with the menus and how they work, proceed to Section II to con-
figure the database.
and enter the password to get back into
[F1]
[F10]
and enter the password to get to the Main Menu.
to log out, then leave the device running.
[F4]
. When asked:
Reboot?
9W004 4.0 User Guide, Rev 01
at the
[F4]
, press
.
[Y]
Advertisement
Table of Contents
