Pad Login Parameters; Async Pad Login Parameters Screen; Async Pad Login Parameters - Cabletron Systems FRM User Manual

PAD Login Parameters

Login Password
Profile Name
Configuring Async Ports
A sync PAD Login ID
* Login ID
A Login Pas sword
B Profile Name
Option:
Figure 12-1 Async PAD Login Parameters Screen
If a record does not exist for the specified profile (or if no profile is
specified), the letter
profile name.
Table 12-2 Async PAD Login Parameters
Parameter
Login Password
Profile Name
interacts with the
Login Required
user must log into the PAD in order to make a call through it.
is a name given to the async PAD's "profile," described earlier in this chapter. If login
is not required (as determined in the Port record), the profile specified in Port record
is always in effect. If login is required, the profile specified in the PAD Login record
becomes effective at login, even if it is different from the profile specified in the Port
record.
If the profile specified is not defined in the database, the default profile,
effect. (See "Configuring Async PAD
Node Name=nod exyz
123451234512345
pass
90
] from Main Menu
[A],[A],[F],[D
will be displayed preceding (or in place of) the
U
Valid Values
0–6 characters
0–10 characters
parameter in the Port record. If login is required, the
Profiles" on page 12-2.)
Default Value
QWERTY
90
, will be in
90
12-7