Table of Contents
Advertisement
Setting the Date and Time
Changing the Login Password
Getting Started
Various operations and reports record the current date and time, as recognized by the
originating device. This operation allows changing one or both, to assure that all
devices in a network are synchronized.
Press
at the Node Configuration Menu (or
[B]
date and time as currently recognized by the FRM will be displayed, and you will be
asked:
Do you want to change the date?
it as is. If changing the date, enter the correct information, noting the values in Table
2-2. After the date, change (or leave) the time in the same way as the date.
Table 2-2 Date and Time Parameters
Parameter
Date
Month
Day
Year
Time
Hour
Minute
Second
The login password is used to gain access to menu operations. When software is
shipped to the customer, the password is
words are case sensitive.)
To change the password, press
from the Main Menu).
When prompted:
1. Enter the old password.
2. Enter the new password, up to 14 characters (
3. Enter the new password again for verification. If this password is not the same as
the entry in step 2, the system will reject the new password (and the old one will
remain valid).
[A], [A], [B]
Press
[Y]
Valid Values
Y/N
1–12
1–31
1980–2099
Y/N
0–23
0–59
0–59
NETLINK
at the Node Configuration Menu (or
[A]
from the Main Menu). The
to change the date or
[Enter]
Default Value
N
1
1
1998
N
0
0
0
. (Note the upper case—all pass-
–
,
–
,
–
).
A
Z
a
z
0
9
to leave
[A], [A], [A]
2-9
Advertisement
Table of Contents
