Table of Contents
Advertisement
13-6
Some changes to IP Interfaces and Static Routes (described later) require
an extra step to update the FRM software. Changing certain parameters will
generate the message:
Do you wish to update them at this time Y/N (N)?
you are making several changes to IP Interfaces and Static Routes, you can
save time by specifying
after the final change will update all changes made to both IP Interfaces and
Static Routes.
If you forget to specify
via
On-line Update Dynamic Routing Parameters
IP/LLC2/BRIDGE/IPX Defaults Configuration menu (or
from the Main Menu).
If the
is
Interface Type
figure Secondary Addresses
following.
IP Interface C onfiguration - Screen 2
In terface Nu mber: 0
Secondary IP Ad dres s Configuration
A
B
C
Seq
Sec. I P Add r
Net Mas k
1
1.0.0.0
223.255.255.0
Op tion :
Figure 13-3 LAN IP Interface – Secondary Address Configuration
Up to 15 secondary IP addresses can be configured on a LAN interface, providing
support for multiple IP subnets on the same physical LAN segment.
To configure a secondary address, press
in reverse video. To select a different address, press a number from
sponding to the sequence (
higher than the highest configured number will display a new entry for the next
sequential number after the highest configured number.)
When a secondary IP address (item B) is entered, default values will be displayed for
items C and D.
To delete an existing entry, press
higher sequence numbers will move up one to fill in the gap.
Dynamic Routing Parameters have changed. .............
for each change until the final one. Entering
N
after the last change, you can still update the FRM
Y
,
, or
Ethernet
802.3
802.5
. Selecting this item will display a screen similar to the
D
E
Bcast Add r
R Metric
0.0.0.255
0
. The selected address will be highlighted
[A]
) number of the entry. (Pressing any valid number
Seq
, then
when asked to confirm. Any entries with
[G]
[Y]
This must be done, but if
,
at the
[G]
[A], [A], [E], [G]
, there will be a menu item called
N ode N ame=nodexyz
F
G
R IP Su pport
Del
0
1–15
Frame Relay Module 4.0 User Guide, Rev 01
Y
Con-
, corre-
Advertisement
Table of Contents
