Port Status/Port Configuration View Label; Bridge Interface Status/Bridge Port Configuration View Label - Cabletron Systems SPECTRUM FDM Manual

Table 3-3. FDDI Port Types (Continued)
M (Master)
S (Slave)
Port Status/Port Configuration View Label
This label displays the status of each port: ACT (Active), CON (Connecting), or
DIS (Disabled). Double-clicking on the label accesses the Port
ConfigurationView. Table 3-4 outlines the menu selections available via this
label, excluding the generic options Navigate, Utilities, Notes, Events, and
Alarms.
Table 3-4. Port Menu Selections
Port Notes
Enable/Disable Port
Port Configuration View
Bridge Interface Status/Bridge Port Configuration View Label
This label displays the status of the FDM's bridging interfaces. Table 3-5
provides definitions of the possible interface states. Double-clicking on the
label accesses the Bridge Port ConfigurationView. Port Configuration (opening
the Port Configuration View) is the only menu selection available via this
label, excluding the generic options Navigate, Utilities, Notes, Events, and
Alarms.
9030829 E5
Port Type
Connects a concentrator to a single attachment station
(SAS), DAC, or another concentrator (DAC or single
attachment concentrator [SAC]). This port is only
implemented in a DAC or SAC.
Connects a SAS or SAC to a concentrator (DAC or SAC).
Menu Selection
Port Status/Port Configuration View Label
Definition
Description
Opens the Port Notes facility.
Enables or Disables the selected port.
Opens the Port Configuration View.
Logical Module Icons
Device View
3-7