USER'S GUIDE
3.
Click on Select. A screen similar to the following will be displayed:
4.
To complete the AppleTalk network system configuration, you need to configure:
•
AppleTalk Network System Properties
•
AppleTalk Network System Ports
•
AppleTalk Network System Static Routes
C
A
ONFIGURING
PPLE
To configure AppleTalk network system Properties:
1.
As the above screen shows, the Site Name and System ID are preconfigured. These parameter
values are taken from site information entered earlier.
2.
You may enable or disable AppleTalk routing on a per system basis.
3.
You may select to use a WAN UnNumbered Interface for this system.
4.
If you have made any changes to the properties, click on Update.
138
SFVRA Configuration Manager
T
N
S
ALK
ETWORK
YSTEM
P
ROPERTIES