Downloading Configuration Updates; Copying Configuration Updates - Cabletron Systems CyberSWITCH CSX150 User Manual

Enterasys cyberswitch csx150: user guide
Hide thumbs Also See for CyberSWITCH CSX150:
Table of Contents

Advertisement

USER'S GUIDE
D
C
OWNLOADING
ONFIGURATION
Note:
Downloading updated configuration files does not update the system's existing
configuration files, it overwrites them.
To download a system's updated configuration files:
1. From the Systems Menu, click on Download Updates.
2. You will see a dialog box with the system's IP address. The SFVRA-CFG downloads the
configuration files to this address. The SFVRA-CFG retrieves the system's IP address from
previously configured data. The SFVRA-CFG retrieves the IP address as follows:
If you configured a LAN interface for the system, it will retrieve the IP address you
configured for that interface.
If there is no LAN interface configured, it will check to see if you configured a WAN
numbered interface. If so, it will use that address for the system's IP address.
If you are configuring new systems centrally with plans to move the systems to their site
after they are completely configured, refer to
3. Select which revision to download. Choices are:
a.
Downloaded Revision
This choice will be available if you have already downloaded a configuration update
directly to the system.
b.
New Revision
This choice will be available if you have generated updates, but have not downloaded them
yet.
4. Click on OK.
5. You should see a message reporting that your download was successful. If the message
includes warnings, correct any errors described in the warnings.
6. Click on Close.
7. The Updates Generated field will again be blank, and the Downloaded Revision field will have been
incremented.
8. Click on Close.
Note that the system will automatically be restarted so that the configuration changes will take
effect.
C
C
OPYING
ONFIGURATION
To copy a system's updated configuration files to a defined destination:
1. From the Systems Menu, click on Copy Updates.
2. If you are copying to diskette, insert a diskette into the diskette drive.
3. From the resulting dialog box, select a destination folder in one of two ways:
a.
Enter the path in the editable text field.
150
SFVRA Configuration Manager
U
PDATES
U
PDATES
New Network
Configuration.

Advertisement

Table of Contents
loading

Table of Contents