Table of Contents
Advertisement
a.
Properties information:
•
Software Release
Select the software release that the Cabletron system is running.
•
IP Information
You may enable or disable IP routing on a per system basis. Also, you may select to use
a WAN UnNumbered Interface.
•
IPX Information
You may enable or disable IPX routing on a per system basis. If IPX is enabled for this
system, enter the system's Internal Network Number. This number uniquely identifies a
specific IPX router in the internetwork. In the Novell environment, an IPX internal
network number must be assigned to all IPX routers. This number is an arbitrary value,
assigned when the IPX router is configured. It may be 1 to 8 hexadecimal digits in
length (up to 4 bytes).
•
AppleTalk Information
You may enable or disable AppleTalk routing on a per system basis. Also, you may select
to use a WAN UnNumbered Interface.
•
Bridging Information
You may enable or disable bridging on a per system basis. If this system has bridging
enabled and will be using Bridge MAC Address Security, enter the system's Ethernet
Address.
b. Options Cards information (for PC-based platforms only):
You may add or delete option cards to the system's configuration. To add an option card:
C
ONFIGURING
Configuring the Site's Systems
SFVRA Configuration Manager
S
ITES
75
Advertisement
Table of Contents
