Table of Contents
Advertisement
USER'S GUIDE
5.
Click on Add. You should now see a screen similar to the following example screen:
6.
Repeat steps 2 through 5 to add additional systems to the site.
7.
To configure additional system information, click on the system's System ID (or on the Product
Code), then click on Edit System Settings. (Double clicking on the System ID or on the Product
Code will also display the screen for entering additional system information.) From the
resulting screen (example shown below) you can configure system Properties, Option Cards
(only for PC-based platforms), Circuits, and Circuit Groups information.
Note:
If the product code you select is CSX100 or Modem User, you will only be able to enter
the system's Ethernet address.
74
SFVRA Configuration Manager
Advertisement
Table of Contents
