Table of Contents
Advertisement
•
You may enable (with a check) PPP Outbound Authentication for sites using a local user
database.
•
You may require that the site's CLID be checked when a connection is made for the site(s)
using an SFVRA database.
5.
From the above screen you may add, edit, or delete CLIDs. To add a CLID, click on Add, then
enter the CLID. Repeat for each required CLID. When done, click on OK. Remember that the
CLID is another device's telephone number from whom this site will accept a call from. For
example, as shown by the screen below, Macon Library will accept calls from Macon_LibAnx
if the calls come in on the following number: 16151119; and Macon_LibAnx will accept calls
from Macon Library if the calls come in on the following number: 16151118.
A
R
DJUSTING
ESTRICTION
Normally, the restriction information should not have to be adjusted. If you do need to adjust any
of the restriction information:
1.
From the Connection Groups' main dialog box, click on the Connection Group Name that is
associated with the connection for which you want to modify the protocol information, then
click on Select (or simply double click on the Connection Group Name).
2.
From the resulting screen, click on Edit Group Connections.
I
NFORMATION
C
C
ONFIGURING
ONNECTION
Modifying Connection Information
SFVRA Configuration Manager
G
ROUPS
95
Advertisement
Table of Contents
