Table of Contents
Advertisement
USER'S GUIDE
E
C
L
NTERING
ALLING
Calling Line IDs (CLIDs) are applicable only if CLID is enabled at the site level (see
Authentication
Information). Once CLID is enabled, you can then enter CLIDs for specific
connections. To configure a CLID for a connection:
1.
From the Connection Groups' main dialog box, click on the Connection Group Name that is
associated with the connection for which you want to add a CLID, then click on Select (or
simply double click on the Connection Group Name).
2.
From the resulting screen, click on Edit Group Connections.
3.
From the resulting [Site Name] Connections screen, click on the particular connection that you
want to make the changes to, then click Edit (or simply double click on the connection).
4.
From the resulting screen, click on the Authentication tab. You will then see a screen similar to
the following:
In the above example, Site Macon County uses a local user database, whereas site Macon Elem
uses an SFVRA database. Keeping this in mind, note the following:
•
You need to select an Authentication Method. This is only required if at least one of the two
sites uses an SFVRA database.
94
SFVRA Configuration Manager
ID
INE
S
Configuring
Advertisement
Table of Contents
