Table of Contents
Advertisement
USER'S GUIDE
To complete the AppleTalk network segment configuration, you need to configure:
•
AppleTalk Network Segment Properties
•
AppleTalk Network Segment Zones
•
AppleTalk Network Segment Ports
•
AppleTalk Network Segment Static Routes
C
A
ONFIGURING
PPLE
To configure AppleTalk network segment Properties:
1.
Using the screen shown above, enter a user-defined Segment Name.
2.
Select a Network Type. Possible network types are Extended and NonExtended.
The Extended Network type indicates that the system is connected to an Extended AppleTalk
network, which allows addressing of more than 254 nodes and supports multiple zones.
The NonExtended Network type indicates that the system is connected to a NonExtended
AppleTalk network, which supports addressing of up to 254 nodes and supports only one
zone.
3.
For Extended Networks: enter the Start and End Network Number. This is the network number
range for the LAN segment. Specifying 0 for both places the segment in discovery mode (a non-
seed router), in which the system learns its configuration information from the seed router.
130
SFVRA Configuration Manager
T
N
S
ALK
ETWORK
EGMENT
P
ROPERTIES
Advertisement
Table of Contents
