C
A
T
ONFIGURING
PPLE
ALK
1.
Click on the AppleTalk tab to display the following AppleTalk dialog box.
2.
Check Enable to enable AppleTalk routing.
3.
To allow AppleTalk dial out, check Make calls for AppleTalk data.
4.
Select an AppleTalk Routing Protocol. This specifies the AppleTalk routing protocol the system
should use with a remote device. The options are none or RTMP. Currently RTMP is only
supported for users who will be dialing into a Cabletron system via a MAC dial-in port.
I
NFORMATION
C
ONFIGURING
Configuring Template Connections Information
SFVRA Configuration Manager
S
T
ITE
EMPLATES
69