Table of Contents
Advertisement
C
C
ONFIGURING
IRCUIT
For BRI circuits only. If the circuit is a point-multipoint circuit, you can select one of the following
call screening methods: none, subaddress, or telephone number (see example screen below).
Call screening methods are defined as follows:
•
None
All calls will be accepted.
•
Subaddress
Uses a configured subaddress for this site. To use this call screening method, you must have a
subaddress configured
•
Telephone Number
Telephone number(s) for your site used for call screening. Only calls directed to that specific
telephone number will be accepted. You also need to enter the maximum number of digits
(starting at the rightmost digit) to be verified.
C
C
ONFIGURING
IRCUIT
An access defines the connection details the system uses to reach the network. CyberSWITCH
systems and 9W006/9W007 SmartSwitch Remote Access Modules default to ISDN accesses (a
C
S
ALL
CREENING
for the circuit's site.
A
CCESSES
C
ONFIGURING
Configuring Circuit Call Screening
SFVRA Configuration Manager
C
IRCUITS
83
Advertisement
Table of Contents
