Table of Contents
Advertisement
C
ONFIGURING
O
VERVIEW
Before you begin configuring site and network specific information, you must first configure the
product code table, and, if applicable, the SFVRA database table.
The product code table allows you to associate a user-defined code with a particular platform. For
example, you could enter CSX6000a as a product code, and select CyberSWITCH 6000 as its
associated platform. Later, as you configure sites, you will use the product codes when adding
systems to the sites.
You only need to configure the SFVRA database table if your network uses an SFVRA Connection
Manager for a user database. For each SFVRA table entry, you enter an SFVRA database site name
and the SFVRA database version that is running. Later, as you configure sites, you will select either
Local User Table or SFVRA for the User Database. If you select SFVRA, you will also need to select
the SFVRA database site. This is selected from the displayed list of previously configured SFVRA
database locations, which are part of the SFVRA database table.
This chapter provides instructions for:
•
configuring the product code table
•
configuring the SFVRA table
C
ONFIGURING THE
The product code table is preconfigured with basic codes. To add new product codes to the table
click on Tables from the menu bar. From the resulting menu, click on Product Codes. The preliminary
product code table will be displayed as shown below:
T
ABLES
P
C
RODUCT
ODE
T
ABLE
Advertisement
Table of Contents
