Table of Contents
Advertisement
USER'S GUIDE
2.
Click on Add. A screen similar to the following will be displayed:
3.
Using the above screen enter the system's IPX network interface Properties.
a.
Select the Segment Name from the list of previously configured IPX segments.
b. Select the Interface Type. Available types are LAN and WAN (Remote LAN). For a
definition of each type, refer to
c.
For LAN interfaces only. Select the LAN port number associated with this interface.
4.
Optional: configure Expert Options. For most configurations the default values are adequate. If
you need to configure expert options for this system, refer to the instructions found under
Configuring IPX Network Segment Interfaces
segment and system configurations.)
128
SFVRA Configuration Manager
page
122.
(the instructions are identical for IPX network
Advertisement
Table of Contents
