Table of Contents
Advertisement
to completely renegotiate CCP (as has been witnessed in testing with some vendors'
devices), this sequence will repeat infinitely.
4.
For SFVRA Database Users: you may enable (by checking) or disable the Callback option. When
enabled, any Cabletron systems that receives a call from this user should disconnect and re-
establish the connection. The returning call will be made by a system within the same group
with at least two more free channels than the system receiving the incoming call, if applicable.
Users must have a telephone number configured in order to enable this feature.
C
P
ONFIGURING
ROTOCOL
CyberSWITCH systems and 9W006/9W007 SmartSwitch Remote Access Modules can
communicate using the following protocols:
•
IP
•
IPX
•
AppleTalk
•
Bridging
Refer to the following sections for completing protocol connection information.
C
IP I
ONFIGURING
NFORMATION
1.
Click on the IP tab to display the following IP dialog box.
2.
Check Enable to enable IP routing (as shown above).
3.
To allow IP dial out, check Make calls for IP data.
I
NFORMATION
C
ONFIGURING
Configuring Template Connections Information
SFVRA Configuration Manager
S
T
ITE
EMPLATES
65
Advertisement
Table of Contents
