Table of Contents
Advertisement
USER'S GUIDE
•
Select the Receive Control. This specifies how the system will process RIP/SAP packets
received on this network interface. When set to Receive, the system will process IPX
RIP/SAP packets received on this network interface and update its internal routing
tables. When set to Do Not Receive, the system will not process any IPX RIP/SAP
packets received on this network interface.
•
Enter the Entry Aging Time. This specifies the time it takes for the system to age out and
make inactive, a dynamic routing table entry learned on this network interface. This
parameter is a decimal value specified in seconds from 1 to 180. The default is 180
seconds.
•
Select the Respond Control. This specifies how the system should respond to RIP/SAP
queries from other devices on this network interface. When set to Respond, the system
will transmit a RIP/SAP response to the requesting device.When set to Do Not Respond,
the system will ignore RIP/SAP requests received on this network interface.
e.
Click on OK.
f.
Click on Close.
124
SFVRA Configuration Manager
Advertisement
Table of Contents
