Table of Contents
Advertisement
USER'S GUIDE
To define a search filter:
1.
Select Options from the menu bar.
2.
From the resulting menu, select Setup Search Filter. The following screen will be displayed:
3.
To setup a search filter for a site name, make sure Site Name is selected as shown above, then in
the Site Name dialog box, enter the target site name. Click OK.
4.
To setup a search filter for a connection group, click on Connection Group, then click on the
connection group selection arrow, and select the connection group from the displayed list of
previously configured connection groups. Click OK.
To use the search filter:
1.
Click on Use Search Filter (As shown below, this appears on the menu after Setup Search Filter).
This will activate the filter. A check will appear next to the Use Search Filter option once it has
been activated.
2.
Once Use Search Filter has been activated, information will only be displayed as designated by
the search filter. For example, if you setup a search filter for site Manchester and then activate
158
SFVRA Configuration Manager
Advertisement
Table of Contents
