Table of Contents
Advertisement
USER'S GUIDE
3.
From the resulting [Site Name] Connections screen, click on the particular connection that you
want to make the changes to, then click Edit (or simply double click on the connection).
4.
From the resulting screen, click on the Restrictions tab. Make the necessary configuration
changes, then click OK.
A
A
I
DJUSTING
CCESS
If you are using the Bandwidth Reservation feature for this connection group, you will need to
select the appropriate circuit group. The circuit group is selected under the Access tab. To select a
circuit group for the connection:
1.
From the Connection Groups' main dialog box, click on the Connection Group Name that is
associated with the connection for which you want to modify the protocol information, then
click on Select (or simply double click on the Connection Group Name).
2.
From the resulting screen, click on Edit Group Connections.
3.
From the resulting [Site Name] Connections screen, click on the particular connection that you
want to make the changes to, then click Edit (or simply double click on the connection).
4.
From the resulting screen, click on the Access tab. You will then see a screen similar to the
following:
96
SFVRA Configuration Manager
NFORMATION
Advertisement
Table of Contents
