Table of Contents
Advertisement
U
G
SING THIS
This guide provides an overview as well as instructions for installing and configuring the SFVRA
Configuration Manager (also referred to as SFVRA-CFG). This guide has been written for the
network administrator responsible for setting-up, configuring, and maintaining networks
configured using SFVRA-CFG.
A
G
BOUT THIS
UIDE
The User's Guide is divided into the following chapters:
System Overview
overview, a brief description of system components, and a list of system requirements.
System Installation
Using the SFVRA-CFG Application
application, and also instructions for using the menu option and tool bars for configuration. A
discussion of SFVRA-CFG system messages is also included.
Configuring Tables
Information configured in these tables is incorporated later when entering other configuration
information.
Configuring Site Templates
template is a time-saving tool, allowing you to configure a template of basic site information that
can be used over and over when configuring similar sites.
Configuring Sites
various site properties (including the site template you wish to use for this site), optional contact
information, and the systems associated with this site.
Configuring Circuits
physical WAN connections to each system. Circuit information includes line properties, and where
applicable, data link and access information.
Configuring Connection Groups
configured sites. Connection groups allow you to divide a network into groups of sites that need
to intercommunicate. Within each group, you can select a central site for the group, creating a star
configuration.
Configuring IP Network Information
information for that subnet. This chapter also provides instructions for entering IP information for
individual systems. IP network information defines how an IP network will interconnect.
Configuring IPX Network Information
IPX information for that segment. This chapter also provides instructions for entering IPX
information for individual systems. IPX network information defines how an IPX network will
interconnect.
UIDE
provides a basic description of the SFVRA-CFG network, an interoperability
provides a step-by-step description of installing your SFVRA-CFG.
provides instructions for starting up the SFVRA-CFG
provides instructions for configuring a product code table and an SFVRA table.
provides instructions for defining SFVRA-CFG site templates. A site
provides instructions for defining individual sites. For each site you will enter
provides instructions for defining the site's circuit information. Circuits are the
provides instructions for establishing connection groups among the
provides instructions for defining IP subnets, then entering IP
provides instructions for defining IPX segments, then entering
Advertisement
Table of Contents
