USER'S GUIDE
switched-network access). Configuring circuit access information allows you to configure the
circuit to have a dedicated access.
To add a dedicated access:
1.
Click on the Access tab.
2.
Click on Add Dedicated Access.
3.
Enter a user-defined Access Name.
4.
Select the Line Protocol used by the access. Choices are:
•
PPP
•
HDLC
5.
For PRI, V.35, and RS232 circuits: select the Data Rate.
6.
For BRI and PRI circuits: select the Bearer Channels that will be used by the access.
7.
For V.35 and RS232 circuits: select the Clocking Type. Choices are:
•
Internal
•
External
8.
Click on OK.
84
SFVRA Configuration Manager