Table of Contents
Advertisement
USER'S GUIDE
For systems using an SFVRA database for authentication, select an Authentication Method. Possible
authentication methods are:
•
PAP
•
CHAP
•
CLID
•
None
•
CPP
•
NT
You may select CLID alone by selecting CLID from the displayed list. You may also select CLID in
conjunction with another authentication method by selecting one method from the displayed list
and then clicking on Check CLID.
C
R
ONFIGURING
ESTRICTION
This section shows you how to configure restrictions connection information for the site template.
The screen below shows the default restrictions configuration.
1.
Select the Base Data Rate (in bps). This is the base data rate at which the system connects to
remote devices.
2.
Select the Initial Data Rate (in bps). Determines the number of calls that will be attempted when
opening the first wide area connection. This provides you with a mechanism to request that a
group of parallel connections be made to a remote device rather than a single connection,
allowing data to begin flowing at greater rates without waiting for the Throughput Monitor to
detect an overload condition. Calls will be made until an additional call would exceed the
configured value. For example, if you have configured the base data rate at 64,000, and the
62
SFVRA Configuration Manager
I
NFORMATION
Advertisement
Table of Contents
