To begin configuring an IP network subnet:
From the menu bar click on Functions then click on IP Network, then on Subnets, or click
the toolbar.
To complete the IP network subnet configuration, you need to configure:
•
IP Network Subnet Properties
•
IP Network Subnet Interfaces
•
IP Network Subnet Static Routes
C
IP N
ONFIGURING
ETWORK
The first entry in the IP networks subnets table is a special entry with a subnet name of <DEFAULT
ROUTE>. This entry is inserted automatically during the SFVRA-CFG installation and cannot be
deleted. It does not actually correspond to a real subnet, but by selecting this entry you can edit the
default route for systems in your network. All IP packets that do not have an explicit routing table
entry will be sent to the default route.
To configure IP network subnet properties:
1.
If you are modifying the default route subnet:
From the screen shown below, click on <DEFAULT ROUTE>, then click on Select (or simply
double click on <DEFAULT ROUTE>).
S
P
UBNET
ROPERTIES
C
IP N
ONFIGURING
ETWORK
Configuring IP Network Subnet Information
SFVRA Configuration Manager
I
NFORMATION
on
103