Table of Contents
Advertisement
USER'S GUIDE
•
To designate the Default Profile:
Select Default_Profile, then click on Edit (or simply double click on Default_Profile). A
screen similar to the following will be displayed:
As stated earlier, circuits configured under the default profile are available for all valid
users. As shown above, the default profile initially shows all of the slot's BRI circuits
to be selected. You may "unselect" the circuits you do not want available for the default
profile. For example, if you want all valid users to have access to circuits LINE2.1 and
LINE2.2, but not to LINE2.3 and LINE2.4, click on LINE2.3 and LINE2.4 so that they
are no longer highlighted. Then click on OK.
•
To add an alternate circuit group, click on Add. Enter a Circuit Group Name. Highlight
the circuits you want available for this group. Click on OK.
Later, when configuring Connection Groups, you may
group
from a list of available circuit groups.
78
SFVRA Configuration Manager
designate a connection's circuit
Advertisement
Table of Contents
