Table of Contents
Advertisement
USER'S GUIDE
3.
Click on Select. A screen similar to the following will be displayed:
To complete the IPX network system configuration you need to configure:
•
IPX Network System Properties
•
IPX Network System Interfaces
C
IPX N
ONFIGURING
To configure IPX network system Properties:
1.
As the above screen shows, the Site Name and System ID are preconfigured. These parameter
values are taken from site information entered earlier.
2.
You may enable or disable IPX routing on a per system basis.
3.
Enter the Internal Network Number. This number uniquely identifies a specific IPX router in the
internetwork. In the Novell environment, an IPX internal network number must be assigned to
all IPX routers. This number is an arbitrary value, assigned when the IPX router is configured.
It may be 1 to 8 hexadecimal digits in length (up to 4 bytes).
4.
Click on Update.
126
SFVRA Configuration Manager
S
P
ETWORK
YSTEM
ROPERTIES
Advertisement
Table of Contents
