Table of Contents
Advertisement
USER'S GUIDE
C
IPX N
ONFIGURING
To configure IPX network segment interfaces:
1.
Click on the Network Interfaces tab. The following screen will be displayed:
2.
Click on Add.
3.
Complete the IPX Network Interfaces Properties.
a.
The Segment Name is preconfigured.
b. Select the Site Name.
c.
Select the System ID.
d. Select the Interface Type. Available types are:
•
LAN
LAN interfaces define segment information for an Ethernet port. You must configure
a LAN interface for any devices that will communicate over the local network.
•
WAN (Remote LAN)
The Remote LAN interface allows remote MAC layer bridge devices to connect to an
IPX segment. All devices connected to the Remote LAN interface are treated as if they
were connected to the same Ethernet segment.
e.
For LAN interfaces only. Select the LAN Port Number associated with this interface.
122
SFVRA Configuration Manager
S
I
ETWORK
EGMENT
NTERFACES
Advertisement
Table of Contents
