Table of Contents
Advertisement
SFVRA-CFG R
You can generate reports that summarize the information you have configured using SFVRA-CFG.
You may select a report category and then narrow down the information included in report. For
example, you may select IP Subnet as the report category, then you can select a specific connection
group and a specific IP Subnet.
To run a report:
1.
Click on Functions then click on Reports. You will see a window similar to the following:
2.
Select a Report Category.
3.
Make a selection from the available options for that particular report category.
4.
If you will be printing out the report, check to see that the Printer configuration is correct. Click
Setup and make any changes if necessary.
5.
Select to either Preview or Print the report.
EPORTS
Advertisement
Table of Contents
