Table of Contents
Advertisement
USER'S GUIDE
•
Click on Add Option Card.
•
Select the Slot number the option card is installed in.
•
Select the Option Card type. In the example screen shown below, we are configuring a
4 port BRI option card to be in slot 1.
•
Click on Add.
c.
Circuits information:
You may enter or edit Circuits information here, through the Site menu bar selection. The
same circuit information is also configurable through the Circuits menu bar selection (see
Configuring
is that the Site circuit dialog box focuses on the individual system, whereas if you access
the circuit information through the Circuits menu bar selection, you look at the circuit
configuration for all of the network's systems.
To configure the system's circuit information here:
•
Click on the Circuits tab.
•
Click on the specific slot/port you are interested in, then click on Edit Circuit. (Double
clicking on your selection will also display the screen for entering circuit information.)
•
Refer to
d. Circuit Groups information:
You configure system information for the Bandwidth Reservation feature under this
heading. Bandwidth Reservation allows a portion of the possible connections (circuits) to
always be available to specific users for both inbound and outbound calls. To increase
flexibility, this feature may be configured to either allow or prevent bandwidth overlap.
Bandwidth overlap will allow normal users to use a certain number of circuits (lines), while
a special class of super users would be allowed access to both the normal bandwidth
(designated in the default profile) as well as special super user bandwidth (designated in
the configured user profile). "No overlap" would restrict each set of users to their own
circuits.
76
SFVRA Configuration Manager
Circuits). In both places, the exact same information is entered. The difference
Configuring Circuits
for instructions for entering circuit information.
Advertisement
Table of Contents
