Configuring Ip Network Subnet Interfaces - Cabletron Systems CyberSWITCH CSX150 User Manual

After entering information for the above example, the Properties screen would appear as:
d. Click on Add.
C IP N
ONFIGURING ETWORK
Not applicable for Default Routes. To configure Network Interfaces information:
1. Click on the Network Interfaces tab.
2. Click on Add.
3. Configure the IP Network Interface Properties.
a. The Subnet Name is preconfigured.
b. Select the Site Name.
c. Select the System ID.
d. Select the Interface Type. Available types are:
• LAN
LAN interfaces define subnet information for an Ethernet port. You must configure a
LAN interface for any devices that will communicate over the local network.
S I
UBNET NTERFACES
C IP N
ONFIGURING ETWORK
Configuring IP Network Subnet Information
SFVRA Configuration Manager
I
NFORMATION
105