Conþguring Ip Interfaces - Cabletron Systems SPECTRUM 1800 User Manual

IP Interface Configuration
3. Use the menu button to select the RIP version you want.
4. Click on
After you have made system-level changes (such as conÞguring IP Node Defaults), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
NOTE
console management via the [F7] command.
Configuring IP Interfaces
An IP interface allows the Internet Protocol to be executed over a frame relay,
X.25, Ethernet, or Token Ring interface. You can display all IP interfaces
conÞgured on the device and conÞgure a new interface through the IP Interface
ConÞguration window.
To access the IP Interface ConÞguration window:
1. Click on the
2. Drag down to IP Interface Configuration, and release. The IP Interface
9-2
Figure 9-1. The IP Node Window
Configuration window,
to save your selection.
button to display the Device menu.
Figure 9-2, will appear.
Configuring IP Interfaces