464
Parameter
Registration Stop
Rate Limiting
Period
PMBR Status
Static RP
Component
Clicking the C
OMPONENT
C
page. The parameters for this page are shown in the
ONFIGURATION
following table.
Parameter
Component ID
Description
This parameter specifies the registration stop rate
limiting period in seconds.
This parameter allows you to enable or disable the
PMBR status in the switch.
This parameter allows you to enable or disable the
Static RP in the switch.
tab brings up the PIM C
Description
This parameter specifies a number uniquely identifying the
component.
4 Networking Switch Modules
OMPONENT