Acer AB460 F1 User Manual page 225

205
LED Indicators
Blade module LEDs are described below in the following table.
LED State
Power LED Green
Amber
Red
KVM/ID Steady On
LED (Blue)
Flashing
Network Flashing
LED
(Green)
System Steady On
Fault LED
(Red)
1In the event of a power failure, the N+1 Redundant Power Supply (if included
in your system's configuration) shares the system load to provide uninter-
rupted operation. The failed power supply should be replaced with a new one
as soon as possible.
KVM Connector
Alternatively, you may connect a KVM cable (CBL-0218L, with a
keyboard/video/mouse attached) to the KVM connector (#7) of the
blade you wish to access. To switch to another blade, disconnect the
cable then reconnect it to the new blade.
See the Acer Smart Blade Console on page 28 for further details on
using the KVM function remotely.
Description
Power On
Standby
1
Power Failure
Indicates that KVM has been initialized on this
blade module
Serves as a ID indicator (the ID function is activated
with a management program)
Flashes on and off to indicate traffic (Tx and Rx
data) on the LAN connection to this blade module.
This LED illuminates red when a fatal error occurs.
This may be the result of a memory error, a VGA
error or any other fatal error that prevents the
operating system from booting up.