Acer AB460 F1 User Manual page 442

422
Parameter
Area Border Router
External LSDB Limit
Exit Overflow
Interval
Demand Extension
Reference
Bandwidth
SPF Delay
SPF Hold Time
Default Passive
Interface
Trace Level
Description
This parameter specifies the router as an area border
router.
This parameter specifies maximum number of non-
default AS-external-LSAs entries that can be stored in
the link-state database.
This parameter specifies the time interval in seconds a
router will attempt to leave OverflowState.
This parameter indicates the router's support for
demand routing.
This parameter specifies Reference bandwidth in
kilobits/seconds, for calculating default interface
metrics.
This parameter indicates the delay in routing
calculation after a topology change.
This parameter specifies the minimum time between
two consecutive SPF calculations.
This parameter specifies whether all the OSPFv3
interfaces created after this setting are passive or not.
This parameter defines the level of trace required for
OSPFv3.
4 Networking Switch Modules