Port Configuration - Acer AB460 F1 User Manual

369

Port Configuration

Clicking the P
ORT
which sets the configuration per Port related to MSTP. The parameters
for this page are shown in the following table.
Parameter
Port
Admin Status
Priority
Path Cost
Protocol Migration
C tab brings up the CIST S
ONFIGURATION
Description
This parameter specifies the port identifier.
This parameter specifies the MSTP protocol status that
can be enabled/disabled on the particular port.
This parameter specifies the port priority used in role
selection.
This parameter specifies the path cost associated with
this port.
This parameter controls the migration among MSTP,
RSTP and STP protocols, if the other side of the switch
runs a different mode. Migration takes place only if
this is enabled.
page,
ETTINGS