Acer AB460 F1 User Manual page 473

453
IGMP Snooping Timer
Clicking the T
IMER
C page, which configures IGMP snooping timers. The
ONFIGURATION
parameters for this page are shown in the following table.
Parameter
Router Port
PurgeInterval (Secs)
Group-Member
Port Purge Interval
(Secs)
Report Forward
Interval (Secs)
Group Query
Interval (Secs)
tab brings up the IGMP S
Description
This parameter specifies the interval for which the
learnt router port will be purged. The default value is
125-seconds
.
This parameter specifies the interval after which a port
gets deleted, if IGMP reports are not received on a
port. The default value is
This parameter specifies the interval within which the
next report messages for the same multicast group will
not be forwarded. The default value is
This parameter specifies the interval within which the
switch sends a group specific query on a port when an
IGMPv2 leave message is received. The default value is
2-seconds
.
T
NOOPING IMER
260-seconds
.
5-seconds
.