Acer AB460 F1 User Manual page 410

390
IP Route
Clicking the IP R
OUTE
which allows you to configure the static IP routes. The parameters for
this page are shown in the following table.
Parameter
Destination
Network
Subnet Mask
Acer
Interface
Distance (Metric)
tab brings up the IP R
Description
This parameter specifies the network address for which
the route is being added.
This parameter indicates the subnet mask for the
Destination Network address.
This parameter denotes the Next Hop Acer to reach the
IP address.
This parameter specifies the outgoing interface.
This parameter specifies the metric value of the
destination.
4 Networking Switch Modules
C
OUTE ONFIGURATION
page,