Candidate Rps - Acer AB460 F1 User Manual

466
Parameter
Component ID
Hello Interval
(Seconds)
Join Prune Interval
(Seconds)
CBSR Preference
Row Status

Candidate RPs

Clicking the C
ANDIDATE
C page. The parameters for this page are shown in the
ONFIGURATION
following table.
Description
This parameter specifies a number uniquely identifying
the component.
This parameter specifies the time interval between two
successive Hello messages being sent by PIM on this
interface.
This parameter specifies the time interval between two
successive Join/Prune messages being sent by PIM on
this interface.
This parameter indicates the preference value for the
local interface as a candidate bootstrap router.
This parameter indicates the operational status of the
entry.
RP tab brings up the C
S
4 Networking Switch Modules
RP
ANDIDATE