Acer AB460 F1 User Manual page 323

303
Parameter
Ports List
(Incoming)
Ports List
(Outgoing)
Protocol
Message Code
Message Type
Priority
TOS
ACK Bit
RST Bit
Source Port (Min)
Source Port (Max)
Destination Port
(Min)
Destination Port
(Max)
Description
This parameter specifies the Incoming Port List for
which the filter has to be applied.
This parameter specifies the Outgoing Port List for
which the filter has to be applied.
This parameter specifies the type of protocol.
This parameter specifies the Message Code to be
checked for ICMP Packets.
This parameter specifies the Message Type to be
checked for ICMP Packets.
This parameter specifies the Priority for the filter.
This parameter specifies the Type of Service for the
access list.
This parameter indicates the TCP Ack Bit to be checked
against the incoming packet.
This parameter indicates the TCP Reset Bit to be
checked against the incoming packet.
These parameters specify the range of TCP/UDP
sourceports from which the access list must be applied.
These parameters specify the destination ports to
which the access list must be applied