Power Cord Tie And Clamp - Acer AB460 F1 User Manual

85
power cord connects to a C20 type socket (IEC-60320-C20) for AC
power on the power supply module.
See Figure 2-49 for an example of a power cord.
The plastic locking clip that partially covers the socket was designed to
prevent the power supply module from being removed with the power
cord still connected.

Power Cord Tie and Clamp

A cable tie and clamp are available for all blade power supply models.
Using the cable tie, in conjunction with the cable clamp and a small
screw, allows you to secure the power cord to the power supply unit.
This avoids it loosening and falling off the power supply due to any
system vibration during its operation.
Figure 2-50 below provides an illustration of the tie and clamps with a
power supply cord and power supply.
Figure 2-50. Power Cord Tie and Clamp Parts
Power Cord
Screw
Power Cord Tie
Adjustable Cable Clamp for Power Cord
Figure 2-51 shows how to assemble the cable tie and clamp on the
power cord. Simply place the clamp around the power cord and attach
the cable tie to both the clamp and the power supply using a screw.