Acer AB460 F1 User Manual page 382

362
Parameter
Default Path Cost
Version
Port Settings
Clicking the P
ORT
page, which allows you to set the configuration per port related to
RSTP. The parameters for this page are shown in the following table.
Parameter
Port
Status
Priority
Path Cost
Description
This parameter allows you to configure the path cost
16-bit
either as a
provided mainly for backward compatibility with STAP.
S tab brings up the P
ETTINGS
Description
This parameter specifies the port identifier.
This parameter enables or disables the RSTP protocol
status on a particular port.
This parameter specifies the port priority used in role
selection.
This parameter specifies the path cost associated with
this port.
4 Networking Switch Modules
32-bit
value or a value. This is
S
ORT TATUS
C
ONFIGURATION