Acer AB460 F1 User Manual page 365

345
No-negotiation
is chosen, then the speed of the link, FlowControl and
duplex modes can be configured. The parameters for this page are
shown in the following table.
Parameter
Port
Mode
Duplex
Speed
Flow Control
Admin Status
Flow Control
Operation Status
HOL Block
Prevention
Description
This displays the port number.
This parameter allows you to select either
Negotiation No-negotiation
or
This parameter allows you to select either
Half Duplex
or .
This parameter allows you to select the speed as
Mbps 100 Mbps
, or
This parmeter allows you to specify the Flow Control
Admin Status as either
Enabled
, Receive Flow Control
Transmit and Receive Flow Control
This parameter displays the status of the flow control.
This parameter allows you to enable or disable Head of
Line block prevention.
.
1 G bps
.
Disabled
, Trasmit Flow Control
Enabled
Enabled
Auto
Full Duplex
10
or both
.