90
Component troubleshooting
Listed below are specific problems that may arise during the use of
your server and their possible solutions.
Power indicator does not light.
Do the following:
•
Make sure the power supply module is properly installed.
•
Make sure the power cord is connected correctly.
•
Make sure that the wall outlet has power. Test it by plugging
another device.
•
Make sure the power indicator on the front panel is lit up green.
•
Remove all add-in cards and see if the system boots up.
If reboot is successful, install the cards back in one at a time with a
reboot between each addition to determine if one of them is
causing the problem.
•
Make sure that you have correctly installed system compliant
memory modules, and that the system DIMM population
guidelines were observed.
•
Make sure that you have installed a system compliant processor.
FDD activity indicator does not light.
Do the following:
•
Make sure the FDD data and power cables are properly connected.
•
Check that relevant switches and jumpers for the FDD are set
correctly.
•
Check that the FDD is properly configured.
5 System troubleshooting