Acer AB460 F1 User Manual page 447

427
Parameter
Area ID
Aggregation Effect
Translation
Description
This parameter specifies the Area identifier.
This parameter specifies the Aggreation option as one
of the following:
• Advertise – When set to
ID is 0.0.0.0, then aggregated Type-5 are generated.
Otherwise if associated Area ID is x.x.x.x (other than
0.0.0.0), then aggregated Type-7 is generated in NSSA
x.x.x.x for the specified range.
• Do Not Advertise – When set to
the associated Area ID is 0.0.0.0, then Type-5 is not
generated for the specified range, while aggregated Type-
7 are generated in all attached NSSA. While associated
Area ID is x.x.x.x (other than 0.0.0.0), then Type-7 are not
generated in NSSA x.x.x.x for the specified range.
• Allow All – When set to
0.0.0.0, then aggregated Type-5 are generated for the
specified range. In addition aggregated Type-7 are
generated in all attached NSSA, for the specified range.
• Deny All – When set to
will be generated for the specified range.
This parameter enables or disables the translation.
advertise
and the associated Area
doNotAdvertise (2)
allowAll
and associated Area ID is
denyAll
neither Type-5 nor Type-7
and