409
RIPng
The RIP6 link allows you perform RIPv6 related configuration for the
switch. This can be accomplished through the following two pages:
•
"RIP6 Interface" on page 409
•
"Filters"
RIP6 Interface
Clicking the RIP6 I
C
page. The parameters for this page are shown in the
ONFIGURATION
following table.
Parameter
Interface ID
Status
Prof ID
Metric Offset
tab brings up the RIP6 I
NTERFACE
Description
Specifies the Interface Id for which RIPv6 needs to be
configured.
This parameter specifies the administration status of
the interface.
This parameter indicates the Index of the Address
Profile entry.
This parameter specifies the metric for the routes that
are being re-distributed.
NTERFACE