435
Parameter
Action
Status
Route Aggregations
Clicking the R
OUTE
C
page, which is used to aggregate and configure the
ONFIGURATION
routes advertised by BGP. The parameters for this page are shown in
the following table.
Parameter
ID
IP Address Prefix
Description
With this parameter you can choose either to
(not to filter) or
configuration set.
This parameter specifies the status of the entry.
A
tab brings up the BGP R
GGR
Description
This parameter specifies the index to this table.
This parameter specifies the IP address prefix that
needs to be aggregated.
Deny
(Filter) for the above
OUTE
Allow
A
GGREGATION