Acer AB460 F1 User Manual page 79

59
Item Name
7 Secondary DNS
Server IP
Address
8 Remote
Console &
HTTPS Port
9 HTTP Port
10 SSH Port
11 Bandwidth
Limit
12 Enable SSH
Access
13 Disable Setup
Protocol
14 LAN Interface
Speed
15 LAN Interface
Duplex Mode
Description
Enter the IP address of the Secondary Domain
Name Server in the box. It will be used when the
Primary DNS Server cannot be contacted.
Enter the port numbers the remote host and the
HTTP server are listening. If a number is not
entered in the box, the default value will be used.
Enter the port number the of the HTTP server. If a
number is not entered in the box, the default
value will be used.
Enter the port number of the SSH server. If a
number is not entered in the box, the default
value will be used.
Enter the maximum bandwidth value for network
interfacing. The value should be in Kbits per
second.
Click this box to enable SSH access.
Check this box to disable the setup protocol
function of the Ethernet switch module.
Click on the arrow on the right to select a desired
LAN interface speed from the pull-down menu.
The options are Auto-detect, 10 Mbps or 100
Mbps. If Auto-detect is selected, the optimized
speed will be set based on the system
configurations detected by the OS.
Click on the arrow on the right to select a desired
LAN interface duplex mode from the pull-down
menu. The options are A
and F D . If Auto-detect is selected, the
ULL UPLEX
LAN I D
NTERFACE UPLEX
optimized setting based on the system
configurations detected by the OS.
- , H
UTO DETECT ALF
M will be set to the
ODE
D
UPLEX